The ITS Telecom CGW-I GSM Gateway is designed to connect to the ISDN2e Trunk of a Telephone system to allow inbound and outbound calls over the mobile phone network. The CGW-I Basic Rate ISDN GSM Gateway is a Dual SIM Gateway and comes with management software to allow the configuration of inbound and outbound call routing. The CGWI GSM Gateway also features a built in LCD Display showing the gateway status at a glance.
The CGW-I BRI GSM Gateway can be configured using the software supplied by a direct serial interface connection or across the LAN or WAN one the unit has been given an IP address. The configuration software provided with the CGW-I GSM gateway will enable the management of multiple units.
Incoming and Outgoing Call Features
Intelligent Routing – Return up to 1,500 mobile calls directly to the calling DDI (Direct Dial-In). CGW-I stores the link between the dialing extension and the dialed cellular number. When a missed mobile call is returned, CGW-I recognizes the Caller ID and routes the caller to the dialer’s extension.
MSN Routing – Route incoming cellular calls to default Multi-Subscriber Number (MSN), such as a specific extension, Automated Attendant or Voice Mail system.
Call Barring – Dedicate your SIM to handle only incoming calls, outgoing calls, or both.
Call Diversion – Automatically reroute incoming calls to an alternate channel when SIM is busy.
Toll Restrictions – Define which cellular operator prefixes to allow the CGW-I to call and which ones not to allow.
Redirect Calls – Override Toll Restrictions and set up a cross-network connection.
Call Duration – Limit the length of calls to protect you from connections that are accidentally left open.
Intelligent Routing – Return up to 1,500 mobile calls directly to the calling DDI (Direct Dial-In). CGW-I stores the link between the dialing extension and the dialed cellular number. When a missed mobile call is returned, CGW-I recognizes the Caller ID and routes the caller to the dialer’s extension.
MSN Routing – Route incoming cellular calls to default Multi-Subscriber Number (MSN), such as a specific extension, Automated Attendant or Voice Mail system.
Call Barring – Dedicate your SIM to handle only incoming calls, outgoing calls, or both.
Call Diversion – Automatically reroute incoming calls to an alternate channel when SIM is busy.
Toll Restrictions – Define which cellular operator prefixes to allow the CGW-I to call and which ones not to allow.
Redirect Calls – Override Toll Restrictions and set up a cross-network connection.
Call Duration – Limit the length of calls to protect you from connections that are accidentally left open.
System Management & Monitoring
|
Full Device Control |
Configure system parameters and view system status levels directly from your PC with included user-friendly Windows-based utility program. |
|
Alarms |
Set thresholds to trigger selected SMS and Email alarms. |
|
Statistics |
View Reception Level and each SIM card’s accumulated traffic. |
|
CDR |
Call Detail Recording log for up to 2,500 records. |
|
Balance Call Distribution |
Evenly distribute call traffic sent to each SIM. |
Configurable Controls & Maintenance
|
CLIP / CLIR |
Display or hide SIM card numbers using Calling Line Identification Presentation/Restriction setting. |
|
SIM PIN Control |
Protect each SIM within the CGW-I from unauthorized use if removed. |
|
Network Lock |
Configure your CGW-I to work permanently with only a specific operator. |
|
Roaming |
Allow calls to automatically connect to the strongest available signal or restrict them to a specific network operator. |
|
Dialing Mode Support |
Overlap or En Block. |
|
End of Dialing Digit |
Reduce the time required to connect a dialed number. |
|
Gain Control |
Adjust volume levels for both incoming and outgoing calls on each channel. |
System Specifications
|
2 Voice Channels: |
Each with Integrated GSM Cellular Module |
|
Indicator LEDs: |
LAN Status (Line and Active), Module Status (2) |
|
Built-in LCD: |
Verify Signal Strength, Operational Status and Cellular Operator Name to simplify maintenance. |
|
ISDN Protocol Support: |
EuroISDN (Standard, In Bound DTMF Dialing, France, Germany), 1TR6 (Germany) |
|
PBX BRI Interfaces: |
NT/TE, PtP/PtMP |
|
Connectors: |
RS-232, , LAN, ISDN Interface, SMA antenna (2), Sync In, Power supply |
|
Frequency Ranges: |
900/1800 MHz or 850/1900 MHz |
|
SIM Card: |
3V (Plug in, Small) |
|
Receiver Sensitivity: |
-104dBm |
|
Input: |
110VAC, 60Hz / 220VAC, 50Hz |
|
Output: |
9VDC, 1.5Amp |
|
Dimensions: |
(HxWxD) – 21.5x4.3x18.5cm/8.47x1.69x7.28 inches |
|
Weight |
: 0.96 kg / 2.12 lbs |
|
Operating Temperature |
: 00C-450C / 320F-1130F |
|
Relative Humidity: |
5-95% |
